 |
|
|
600 Series 90° Pump
with C Face Adapter
|
| |
|
|
|
| |
- Available with ports aligned at either 90 or 180°s, Bowie 600 Series pumps are easily installed in different piping configurations.
- Dual high quality ball bearings on both ends of each shaft allow for optimum wear and a longer pump life.
- A factory tested mechanical seal on the drive shaft ensures a smooth, quiet and leak proof operation.
- A combination of Viton and Teflon double lipped seals protect bearings from the product, ensuring extended pump life.
- By increasing the standard shaft diameter to 1 ¼” (32mm), the Bowie 600 Series reduces the load on its bearings, giving you longer pump life.
- Pump housing and end plates are constructed from ductile iron castings, providing higher tensile strength and better wearability than cast iron.
- Pump can be rotated bi-directionally, allowing for flow to be reversed without changing pump configuration.
- Buna-N rubber, helical steel, and helical Delrin gears are interchangeable and available to suit any application.
- Optional stainless steel shafts available for use in chemical service.
- Optional bi-directional bypass plate protects downstream piping and hoses from excessive pressure.
- With the addition of the bi-directional bypass plate, upstream and downstream relief pressures are adjustable and can be set independently from one another.
- Addition of a Bowie Flange Adapter allows for direct connection of the pump to an electric or hydraulic drive unit.
- All Bowie 600 Series pumps are factory tested prior to shipping to ensure that you receive the performance that you want.
|
|
|
|
|
|
|
